Kits with electrical box for rough-in when using sheetrock or plaster ceiling construction.  RPK-42: Rough-in mounting system for use with the EVID C4.2. Includes junction box and flexible conduit to support pre-wiring of the installation. (package of 2) RPK-82: Rough-in mounting system for use with the EVID C8.2 and C8.2LP. Includes junction box and flexible conduit to support pre-wiring of the installation. (package of 2) RPK-810: Rough-in mounting system for use with the EVID C8.2HC and C10.1. Includes junction box and flexible conduit to support pre-wiring of the installation. (package of 2)

Kits for rough-in pre-install when using sheetrock or plaster ceiling construction. RR-42: Rough-in mounting plate for use with the EVID C4.2 (package of 4)RR-82: Rough-in mounting plate for use with the EVID C8.2 and C8.2LP (package of 4)RR-810: Rough-in mounting plate for use with the EVID C8.2HC and C10.1 (package of 4)

Perfect for conventional rooms. Excellent bandwidth in an esthetically, unobtrusive installation profile. Its compact design fits in tight areas. Fully rated for use in air handling spaces. Its 4" woofer and waveguide coupled titanium coated dome tweeter give smooth, wide frequency response. The enclosure is ported and tuned to provide surprising bass response in such a compact package. Features an easy 3-point mounting system for quick installations. Comes complete with mounting support ring and tile rails. No additional accessories needed for most installations.

Never before has a ceiling speaker system delivered such a full range punch. Its specially tuned enclosure and 8" woofer provide amazing bass response. The 1" waveguide coupled tweeter give smooth controlled coverage out to 18 kHz. Perfect for installations where a flush mount design is desired but demand for high quality audio exists. Features a 4-point mounting system which makes installations fast and easy. Comes complete with mounting support ring and tile rails. No additional accessories needed for most installations. The model C8.2LP is identical to the C8.2 but in a low profile backcan for tight installation spaces.

The Electro-Voice® PA2400T is from the PA series of professional commercial audio amplifiers. The direct path airflow design reduces the heat buildup significantly and allows for more amplifier channels and output power in slim two rack space chassis. The audio performance of the PA2400T is superior and fulfills the requirements in many demanding long term applications from sound reinforcement, paging or life safety installations.   High performance torroidal power and output transformers combine clean saturation free audio performance with cool running operation. The PA2400T features many of the same comprehensive protection circuits typical in EV amplifiers. Complete protection is provided for high temperature, audio limiters, power up delay and peak current limiters. In addition to the rated output power, the PA2400T provides excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the PA2400T will not will not generate excessive distortion. The amplifier channels can be bridged for more power flexibility.  Marked level controls on the rear panel provide hidden reliable level adjustments for each channel. Front panel LEDs indicate signal present, 0 dB, and limit. Phoenix type connectors for inputs and outputs provide an easy rack wiring. Major Features 2 x 430W at 50/70/100V or 4 Ohms 2 U Rack Space Chassis Rear Level Controls Complete Protection Package Bridge mode operation provides 1 x 860W at 8 ohms Selectable 50Hz or 300Hz hi-pass filter for each channel Phoenix Type Inputs Phoenix Type Outputs High Efficiency Circuit Design Front Panel Power On/Off