Key Features:
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• Dual DVX3121 12” LF Transducers with
Forced Air Cooling
• Long-Throw 45° x 30° Rotatable Coverage
Pattern
• 1000W Continuous (4000W Peak) Power
Handling
• Biamp Operation
• Very High Sensitivity, 138 dB Maximum SPL
• Integral Rigging Points for Eyebolts or
Optional Rigging Kit
• Designed to be Arrayed

Technical Specifications:
PX2122
12” Two-Way
Dual Manifolded HF 45° x 30°
Fullrange Loudspeaker System
Key Features:
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• Dual DVX3121 12” LF Transducers with
Forced Air Cooling
• Long-Throw 45° x 30° Rotatable Coverage
Pattern
• 1000W Continuous (4000W Peak) Power
Handling
• Biamp Operation
• Very High Sensitivity, 138 dB Maximum SPL
• Integral Rigging Points for Eyebolts or
Optional Rigging Kit
• Designed to be Arrayed

The Electro-Voice® PX2122 is a high efficiency 2-way
loudspeaker system that is part of the Electro-Voice®
Phoenix Series and is intended for high output sound
reinforcement in fixed-installation and portable sound
applications. The PX2122 is configured for biamp
operation, and to be used with the PX2181 for extended
LF in a 3-way configuration for highest SPL capability.
The PX2122 uses dual DVX3121 woofers, a high
efficiency 12-inch woofer with forced air cooling, in a
vented enclosure. Dual ND2-16 compression drivers
are precisely summed in a manifold for increased power
handling, maximum SPL, and lower distortion. The very
low distortion 45° x 30° horn provides tight coverage,
long throw, and is rotatable. Designed to be used as
array elements, up to three PX2122’s can be arrayed
together for 135° of horizontal coverage. The enclosure
is constructed of 18-mm, 13-ply plywood using tongue
and groove joints and EVCoat for long term durability.
The PX2122 is designed to reproduce the frequency
range above 80 Hz, and should be used with the PX2181
subwoofer for fullrange. The enclosure shares the
same footprint as other speakers in the Phoenix line for
system flexibility.

Freq. Response1(-3 dB): 80 Hz - 15 kHz
Freq. Range1(-10 dB): 60 Hz - 19 kHz
Rec. Hipass Frequency: 80 Hz
Axial Sensitivity1:102 dB (1W/1m)
Max Calculated SPL1:138 dB
Horizontal Coverage: 45°, or 30°
Vertical Coverage: 30°, or 45°
LF Power Handling: 1000W Continuous, 4000W Peak
HF Power Handling: 80W Continuous, 320W Peak
LF Transducer: (2) DVX3121, 12 in. (305 mm) Driver
HF Transducers: (2) ND2-16, 2 in. (50mm) Diaphragm
Compression Drivers
Crossover Frequency: 1600 Hz
LF Impedance: 4 Ohms Nominal
HF Impedance: 8 Ohms Nominal
Connectors: (2) Neutrik Speakon NL4's
Enclosure Material: 18mm Plywood with Black EVCoatTM
Suspension: (8) M10 Points - (6) on Top and (2) on
Bottom of Enclosure
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Dim (H x W x D): 1219mm x 457mm x 445mm
(48.00" x 18.00" x 17.50")
Net Weight: 50.1 kg (110.3 lbs)
Shipping Weight: 58.9 kg (129.6 lbs)