1,800 watts per channel at 2 ohms. Neutrik Speakon® output connectors allow use of heavy-gauge speaker wire for low-loss connections. Extremely low dynamic distortion ensures excellent sound quality. Three rack spaces.

Electro-Voice’s Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a  compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV’s Precision Series sound. With up to 2 x 1600 watts into 2 ohms and 2 x 1100 watts into 4 ohms, it is both powerful and lightweight, at only 17.96 lbs (8.15 kg). The CP3000S is state-of-the-art for all kinds of applications. It is specifically designed to allow for long-term driving of low loads into subwoofers without stress. The CP3000S's reliability and its pleasing, rich sound make it the first choice for all mid- and hi-range speaker cabinets.

2-in/4-out loudspeaker processor 115 dB dynamic range, for highest audio performance 48-bit filter algorithms 24-bit A/D and D/A conversion Real-time control and configuration via front panel or PC interface with RACE software supplied RS-232, MIDI interfaces are standard, RS-485 bus for networking optional Contact-closure interface optional.

The QRx-112/75 is a 12-inch two-way, full-range loudspeaker system with 300 watts continuous, 1,200 watts peak power handling. Can be easily biamped DH7 3-inch voice coil compression driver delivers beautifully detailed sound Asymmetrical 75° x 50° fully rotatable constant-directivity horn. In the factory-delivered position, the horn provides a 15°up/35° down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined. Five-sided cabinet design allows the system to be used as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Built-in L-track rigging on top and bottom of enclosure and single-stud pull-up point on the back. The system is shipped with 4 Ancra single-stud fittings. Enclosure is built of 13-ply, void-free, grain-oriented plywood and finished in Futura, a baked-on polyurethane finish that is rugged and durable. Available in black or white. Ring-Mode Decoupling for pure, accurate vocals and rich reproduction of instruments

15-inch two-way, full-range loudspeaker system with 400 watts continuous, 1,600 watts peak power handling. Can be easily biamped with 400 watts LF and 75 watts HFcontinuous DH73-inch voice coil compression driver on an asymmetrical 75° x 50° fully rotatable constant-directivity horn. In factory-delivered position the horn provides a 15°up/35° down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined Five-sided cabinet design allows this main PA system cabinet to easily conform to duties as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Available in black or white. 13-ply, void-free plywood enclosure comes equipped with metal stand mount, L-track rigging on the top and bottom and a single-stud pull-up point on the rear of the enclosure for use flexibility Ring-Mode Decoupling for beautifully detailed vocals and smooth midrange performance