The newly designed NX350 is the next evolution of the molded loudspeaker. Based on the popular NX20, the most successful molded cabinet Yorkville has ever made, the NX350 incorporates many new features and subtle improvements over the initial design.
The new NX350 is slightly larger that the original NX20. The increased cabinet volume greatly increases low frequency response and makes for a better, more balanced overall cabinet tone. It features a new 80º x 50º horn, patterned after the custom ABS waveguide horn used in the popular élite loudspeaker line.

As with all NX series enclosures, the NX350 is manufactured using tough, light weight low resonance variable density composite materials. In addition they are UV and moisture resistant. The new shape employed on the NX350 makes for an improved monitor angle, and makes it ideal for mounting in tight arrays, or in multiple cabinet clusters. It easily handles 350 watts with its Neodymium driver 12-inch woofer, and has a more durable, smoother finish due to an improved molding process, which completely eliminates all release marks as well as the screw flutes, which are used to mount the front baffle in place. The NX350 the ideal replacement for the NX20, and is the ideal cabinet to become the flagship of the NX Series.

The NX350 features our PTC™ (Positive Temperature Coefficient) protection on the high frequency compression driver. PTC™ is an ingenious current sensing / self-resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.

Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained ‘squeal’ can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.

The NX350 enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor. An improved wedge monitor angle has been incorporated into the new design. The NX350 is available in either white (NX350W) or black finish.

Features
Ultra-light variable density acoustic foam construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Ultra-high efficiency performance requires less power for more output
Ultra lightweight Neodymium Woofers
High quality 1" High Frequency drivers
Next generation woofer / driver / horn technology
Integrated flying hardware (3/8" threaded holes)
Tough, full length metal grille
Recessed Input panels
PTC™ HF protection system
Available in black or white (NX350W) finishes



Specifications
System Type 2-Way
Active or Passive Passive
Program Power (Watts) 350
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 100
Max SPL (dB) 125
Frequency Response (Hz +/- 3db) 60 - 18k
Crossover Frequency (Hz) 2.3k
Driver Configuration 12 inch / 1 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1 inch Mylar voicecoil
HF Dispersion (°H x °V) 80 x 50
HF Protection PTC™
LF Driver(s) 12 inch Neodymium Magnet, 2.5 inch voicecoil
LF Program Power(Watts) 350
LF Impedance(Ohms) 8
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 1
Feet Yes
Optional Flying Hardware NX Flyware / Eyebolts
Bar Handles 1 (Side)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Variable Density Molded Composite
Grille Perforated Metal
Optional Covering / Finishes White (NX350W)
Dimensions (DWH xbackW, inches) 13.25 x 16.5 x 27.25 x 8
Dimensions (DWH xbackW, cm) 0.33 x 0.42 x 0.69 x 0.2
Weight (lbs/kg) 29 / 13.2


NX Series Overview
NX - Not all man made materials are created equal, acoustically speaking…
The NX Series loudspeaker cabinets have undergone a constant evolution since the flagship model, the NX20, was introduced in early 2000. Along the way, improvements in the molding process have led to the use of tougher, lightweight, low resonance variable density composite materials, use of denser foam in select locations and redesigned part geometry for a much sturdier and a much stronger molded loudspeaker box.

The NX Series cabinets now have a smoother, more rugged and more professional final finish. Select cabinets are now available in either the standard black finish for touring or club system PA applications, or in white paintable finish for fixed installations.

All cabinets in the NX Series are molded for maximum versatility, and all boxes can be used as either a full range front of house enclosures, as floor monitors or as installation loudspeakers. Integrated flypoints, recessed handles, dent resistant all metal grilles and integrated stand mount adaptors are included on all NX Series cabinets ensuring maximum flexibility. Speakon and 1/4-inch connectors on the passive cabinets (XLR and TRS balanced connectors on the active loudspeakers) ensure simple and secure connectivity. All NX Series cabinets are UV and moisture resistant and can be used in outdoor applications.

The trapezoid box is ideal for mounting in arrays, or for use as a monitor, with recessed input jack plate and an ideal wedge monitor angle that was taken into account in the initial design. Neither application was considered as an afterthought. Stand mount and flying hardware are also available.

Capitalizing on the lightweight molded cabinet design and equipped with a proprietary neodymium woofer, Active versions of the NX series are also available in the line.

Even when fully loaded with the unique processing crossover, CTL™ high frequency protection circuits and TWO amplifiers that drive the bi-amped system, the NX55P is a 550 watt powerhouse that still weighs in at an easily manageable 47 lbs, and the NX600 features a 600 watt 15” low frequency driver and still only weighs 44lbs, the lightest in its class by a long shot. The passive 2-Way NX88 weighs in at an ultra-low 17lbs, our most compact loudspeaker yet.

NX Series Characteristics
Active and Passive versions
Ultra-light variable density molded Polypropylene construction
Dual purpose full range and wedge monitor format enclosure
Ultra-clear reproduction throughout bandwidth
Ultra-high efficiency performance requires less power for more output
Light-weight Neodymium Woofers on select models
Next generation woofer / driver / horn technology
Integrated flying hardware
Tough, full length metal grille
Recessed input panels
CTL™ (current to light) HF protection system