[KARAOKE] [DJ GEAR] [GUITARS] [LIGHTING] [LIGHT BULBS] [NEW GEAR] [USED GEAR] [RENTALS] [BLOWOUTS!]
Yorkville LS808 Speakers at the lowest prices! Power Alley is an authorized dealer for Yorkville LS808 Speakers! Free shipping on Yorkville LS808 Speakers. Call 800-788-9552 for the best deal on Yorkville LS808 Speakers!
LS808 - Subwoofer - 800w, 18 inch
All Úlite subwoofers are horn-loaded except for the LS1004 which is a bass reflex design. Suitable for touring or fixed installations, the cabinets are constructed of 15mm 11-ply Baltic Birch with heavy internal bracing for reduced resonance and better durability. All enclosures are covered in a black carpet covering and incorporate metal corner protectors, rugged curved anti-resonant metal grilles, and 1/4" or Speakon input connectors. An optional finish of black ultrathane paint (LS808B) is also available. Additionally, the Speakon connectors feature a configuration switch which allows instant reversal of Speakon jack pinouts for easy single wire hook-up using optional four wire Speakon cables.
The LS608 and LS808 include flush, top-mounted stand adapters so that optional speaker poles may be used to mount full range enclosures above avoiding the need for separate tripod stands. The LS608 and LS808 both feature dual, side-mounted, inset carry handles making it easier for two people to carry them. The LS808, LS1004 and LS1208 have tilt-back wheels and top/rear mounted corner handles for better maneuverability and stacking (wheels don't fall in the handles!!).
System Type Rear Horn-Loaded Subwoofer
Active or Passive Passive
Program Power (Watts) 800
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 105
Max SPL (dB) 134
Frequency Response (Hz +/- 3db) 45 - 180
Driver Configuration 18 inch
LF Driver(s) 18 inch, Ceramic Magnet, 4 inch voicecoil
LF Program Power(Watts) 800
LF Impedance(Ohms) 8
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 2
Other Controls / Features Speakon connectors feature a configuration switch which allows instant reversal of Speakon jack pinouts for easy single wire hook-up using optional four wire Speakon cables.
Corners Black Steel
Bar Handles 2 Side
Pole Mount Adapter (1 3/8"-3.5cm) 1 Top
Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
Grille Heavy gauge perforated metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (LS808B)
Dimensions (DWH xbackW, inches) 23 x 28.3 x 31.5
Dimensions (DWH xbackW, cm) 58.4 x 71.9 x 80
Weight (lbs/kg) 114.7 / 52
Úlite Series Overview
The Compact & Complete Solution Yorkvilles Úlite series loudspeaker systems are the result of years of research, pushing the limits of modern state-of-the-art sound reinforcement technology. Engineered for the serious pro audio user, Úlite systems are among the most advanced, most versatile and most efficient high powered portable P.A. boxes available.
New models for a new millennium
Since the mid 80s, the Úlite series has grown from the original compact M-160, into a complete line of professional enclosures including active and passive full-range cabinets, stage monitors and subwoofers.
Todays Úlites, from the highly efficient two-way E10 to the 1500 watt E2152 have some of the most advanced component protection and crossover technology available today. They have been carefully designed to bring you the latest in Yorkvilles advanced loudspeaker engineering.
A new concept in loudspeaker cabinet design first seen in Yorkvilles Pulse TM352 and TM12 is perfected in the Úlite line. Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.
Modified Trapezoidal Shape A modified trapezoidal shape and recessed input jack panel and handles mean these cabinets can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some multi-function loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that Úlite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.
Several of the Úlite loudspeakers are loaded with 80░ x 50░ rotatable ABS Waveguide horn assemblies (the E10 utilizes a 100░ x 25░ horn). The ability to rotate the horn assembly ensures that the cabinet can provide optimum high frequency dispersion when the loudspeaker is used in either a vertical, horizontal or arrayed application.
Integrated stand mount adapters and flyware means these enclosures can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the Úlite series can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.
Of course, the Úlite series has retained the features and high quality sound that have made them so popular including Yorkville's famous two year (even if you break it!) transferable warranty.*
* Compact and simple to operate
* Linear, full range frequency response
* Time aligned with low distortion
* High power handling, high efficiency, high SPL
* High efficiency, high excursion, linear response drivers.
* High definition, high slope internal passive crossovers.
* Computer modeled enclosure designs to accommodate greater driver dynamics.
* Unique protection networks capable of reacting equally to power overloads and input distortion levels.
* Dual purpose electronic processors specifically designed to enhance bass response and to act as stereo crossovers when bi-amping with subwoofers.
Advanced Crossover Networks and Protection Schemes
The majority of the Úlite range feature seamless driver interaction through sophisticated high-slope passive networks and ingenious component protection schemes. Rugged jackplates are inset and include a combination of both Speakon and 1/4" phone jack inputs.
Advanced PTC Horn Protection makes its debut in the Úlite series.
PTC is an ingenious current sensing / self resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.
Where PTC shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained squeal can destroy diaphragms in seconds. PTC will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.
The E2152 features the ATP (Active-Transistor) protection system, which allows the horn driver to operate at levels significantly above those required for normal operation. The ATP brickwall element of the protection circuit uses power transistors configured to operate linearly yet have the fast attack required to protect against harmful transients. Along with ATP, the crossover also incorporates air core coils and polypropylene capacitors to guarantee reliable and distortion free operation at extreme levels. The sonic benefit is higher output and greater transparency when operating at high levels.
Under the hood of an E152 The L-Series uses our MSP (Multi-Sensing) protection system. This sophisticated and accurate protection network covers all the bases. Components are protected from excess subsonic energy, as well as short term (20ms) and long term (500ms) overpowering. This combination accurately protects against mechanical and thermal failure. In addition the high frequency driver is transparently and reliably protected by borrowing the light bulb from our CTL protection scheme and combining it with a relay (to further protect the light bulb). This self resetting protection scheme accurately senses clear abuse to any band, and shuts the band down until the potentially damaging situation is resolved. Bright indicator LED's (one for LF, one for MF/HF) are provided on the crossover dish to warn the user of impending / active shutdown. Along with the protection scheme, the L-Series crossover also incorporates polypropylene capacitors to guarantee reliable and distortion free operation at extreme levels. The sonic benefit is higher output and greater transparency when operating at high levels.
Úlite Series Characteristics
Full function stereo analog processors that are configurable for passive or bi-amp operation, as well as live or recorded music applications make sure that your Úlite system is always tuned and ready.
Rugged Driver Mounting System
All Úlite cabinets feature a specially reinforced driver mounting system that makes sure the horn drivers will still be attached to the horns when you get to the show. The ABS or composite horns are pressure fitted to the driver which is bolted to the internal driver support.
Custom Design Horns
Custom ABS plastic and composite horns are specifically designed for each cabinet and manufactured right in our factory for optimum quality control. This insures proper waveguide output for better clarity and lower distortion.
E2152 Cutaway ImageRugged Black Carpet Covering
The stylish yet practical carpet that covers the Úlite cabinets keeps them looking great. The two part rubberized glue that is used to attach the carpet ensures that Úlite cabinets will stand up against moisture by effectively wrapping the cabinet in a rubber glove.
Curved Metal Speaker Grilles
Curved metal grilles absorb shocks evenly to resist dings and dents while eliminating frequency resonance. The trapezoidal cabinet shape allows for arrayable performance without phase cancellation.
All Úlite cabinets feature attractively recessed bar handles. Great care is taken to make sure that they "stay out of the way", but are easy to get at when you need them.
Flush Mounted Stand Adapters
Flush-mounted stand adapters in the top of the subs and bottom of the full-range speakers allow the use of the adjustable SW-TELETUBE option which makes setup a breeze by eliminating the need for speaker stands.
Tilt back wheels and top-mounted handles are standard issue on the larger cabinets such as the E215, E2152, LS1208 and LS1004.
* Warranty valid in U.S.A. and Canada only