Home ] Feedback ] Contents ] Search ] [Browse by Brand]  

Yorkville MM6

Yorkville MM6 at the lowest prices!  Power Alley is an authorized dealer for Yorkville MM6!  Free shipping on Yorkville MM6.  Call 800-788-9552 for the best deal on Yorkville MM6!

MM6 - Mixer/Amp - 150w, 6 inputs
The MM6 six channel powered mixer delivers 150W @ 4ohms and features 6-band main EQ and reverb. Each channel offers XLR and 1/4" phone inputs along with treble, bass and effect controls. It has little less power, but it still has quality and features you'd expect from Yorkville.

Number of Channels 6
Mono Channel EQ Low, High
Stereo Channel EQ N/A
Channel Effects All Channels
Monitors Effects No
Inputs - XLR (bal) Ch. 1 - 6
Inputs - 1/4" Ch. 1 - 4
Inputs - RCA (unbal) 2 Pairs
Clip /Mute LED Master Section
Phantom Power NA
Internal Effects Spring Reverb
Effects Send Yes
Effects Return Yes
Effects Return to Main Yes
Effects Return to Monitor No
Reverb / Effects Footswitch Yes
Record Outputs 1 Mono RCA Pair
Max Gain to Line Out -Mic Input (dB) +55
Max Gain to Line Out -Line Input (dB) +40
Master EQ -1 (type /Channels /Range - dB) Graphic / Mono / 6 Band 63 Hz - 16,000 Hz
Main Outputs ( Line Level) 1x 1/4 inch (TRS)
Main Amp Inputs (Line Level) 1x 1/4 inch (TRS)
Outputs - Amp A - 1/4" Jacks 2
Mixer - Signal to Noise Ratio (dB) 90
Mixer - Frequency Response (Tone and EQ Flat,+/-2dB) 20 Hz - 20,000 Hz
Mixer - Input Referred Noise to line out, @ 150 Ohms (dBv) -117
Mixer THD (Main out w/ -10dB input) less than 0.05%
Amp A - Power Output @ 8 Ohms (0%1"THD, 1kHz) 85
Amp A - Power Output @ 4 Ohms 150
THD - 1kHz (dB) less than 0.05%
THD - 20Hz-20kHz (dB) less than 0.1%
Hum and Noise (un / Aweight -dB) -96
Typical crosstalk -1 kHz (dB) less than -60
Input Impedance - Bal/Unbal (Ohms) 2200/10K
Input Sesitivity (Vrms Sine) 1.4 V
CMRR @ 60Hz (min/typ) 54 dB / 66 dB
Max Votage Gain (dB) 25
Power Consumption (typ/max) 110 VA / 320 VA
Protection Thermal / Load / DC
Cooling Passive Heat Sink
Transformer Type El Core
Finish Blue/Black Carpet, Scratch Resistant Front Panel
Chassis Construction Heavey Gauge Metal with Plywood Cabinet
Dimensions (DWH, inches) 10 x 21 x 9.25
Dimensions (DWH, cm) 25 x 53 x 24
Weight (lbs/kg) 31 / 14
MicroMIX Series Overview
The M1610 Wedge Mixer For simple plug-and-play, nothing beats the Yorkville MicroMIX™ series. They offer high performance in complete, compact, flexible packages. Although simple, MicroMIX™ series mixer are not short on features. Ease-of-use and practical designs are at the center of the MicroMIX™ line of powered box mixers. Whatever you require, Yorkville has the right MicroMIX™ for you.
MicroMIX Series Characteristics
Yorkville's MicroMIX™ powered box mixers offer more power, more features and are more affordable than ever. Standard features include:

* scratch resistant front panels
* metal phone jacks
* graphic EQs*
* built-in limiter
* phantom power
* onboard reverb/effects*
* balanced XLR, 1/4" phone and dual RCA inputs
* 19" rackmount versions**
* gold plated connectors

All Yorkville Box Mixers feature 3/4" plywood construction covered with blue/black carpet (excluding rackmount version). Chassis are constructed of heavy metal to withstand all the rocking and rolling associated with life on the road while inside we use high quality epoxy circuit boards coated with thick copper laminate and precision, 0.1-1% tolerance, low noise components. A large heatsink and a variable speed DC fan (MP8DX) ensure that the mixers keep their cool. Of course MicroMIX™ mixers also come with Yorkville's standard two year (even if you break it!) transferable warranty in the USA and Canada. These are just a few of the characteristics which make MicroMIX™ mixers the "Best Bang for the Box".