[KARAOKE] [DJ GEAR] [GUITARS] [LIGHTING] [LIGHT BULBS] [NEW GEAR] [USED GEAR] [RENTALS] [BLOWOUTS!]

[ Home ] [ Feedback ] [ Contents ] [ Search ] [Browse by Brand]

Crown MICRO-TECH 1200 Amplifier

no longer available

Crown's first touring workhorse, the Micro-Tech Series, delivers industry standard performance and reliability.

Able to drive low-impedance loads with ease, Micro-Tech amplifiers feature three separate power supplies for exceptional reliability and impressive power ratings. Our patented ODEP circuitry keeps the amplifier working long after others would quit. Grounded bridge circuitry doubles the available voltage without placing output transistors in stressful configurations like other more conventional amplifiers. The unique forced-air cooling system makes certain heat is dissipated quickly and evenly. As a result, you get maximum performance without the threat of damage to the amplifier or other system components.

FTC Continuous Average Power from 20 Hz to 20 kHz with No More than 0.1% THD:

Micro-Tech 600: 210 watts into 8 ohms, 285 watts into 4 ohms.
Micro-Tech 1200: 295 watts into 8 ohms, 425 watts into 4 ohms.
Micro-Tech 2400: 495 watts into 8 ohms, 685 watts into 4 ohms.

SPECIFICATIONS

Amplifier Accessories: Accepts MT-BB barrier-block and MT-XLR input modules.

Signal-to-Noise Ratio: (A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power.

Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced.

Controls: Enable, channel 1 and 2 level controls, stereo/mono switch (Stereo, Bridge-Mono, Parallel-Mono), ground lift switch, three-position input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain). Reset switches (Micro-Tech 2400 only): Two back-panel switches used to reset the breakers that safeguard each power supply from overload.

Connectors:

Inputs: Balanced 1/4-in. phone jack for each channel.
Output: A pair of color-coded binding posts for each channel.

Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mounting surface.

Net  Weight:

Micro-Tech 600: 36 lbs., 4 oz. (16.5 kg).
Micro-Tech 1200: 41 lbs., 1 oz. (18.7 kg).
Micro-Tech 2400: 46 lbs., 14 oz. (21.3 kg).

Shipping  Weight:

Micro-Tech 600: 41 lbs., 2 oz. (18.7 kg).
Micro-Tech 1200: 45 lbs., 3 oz. (20.5 kg).
Micro-Tech 2400: 55 lbs., 12 oz. (25.3 kg).

Total Harmonic Distortion (THD): Less than 0.05% at full rated power from 20 Hz to 1 kHz increasing linearly to 0.1% at 20 kHz.

Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 164 milliwatts to full rated power.

Load Impedance: Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono, 1 to 4 ohms in Parallel-Mono. Safe with all types of loads.

Output Power per Channel in Stereo Mode with Both Channels Driven:

Maximum Average Power at 1 kHz with No More than 0.1% THD:

Micro-Tech 600: 220 watts into 8 ohms, 325 watts into 4 ohms, 400 watts into 2 ohms.
Micro-Tech 1200: 310 watts into 8 ohms, 480 watts into 4 ohms, 675 watts into 2 ohms.
Micro-Tech 2400: 520 watts into 8 ohms, 800 watts into 4 ohms, 1,050 watts into 2 ohms. Output Power in Bridge-Mono Mode:

Maximum Average Power at 1 kHz with No More than 0.1% THD:

Micro-Tech 600: 750 watts into 4 ohms.
Micro-Tech 1200: 1,300 watts into 4 ohms.
Micro-Tech 2400: 2,070 watts into 4 ohms.